Edge-Core ES4308-PoE Instalační příručka stáhnout pdf (Strana 66)

Configuring the Switch

3-48

Power over Ethernet Settings

Configures Power over Ethernet (PoE) parameters for the switch.

Field Attributes

• Port 1 Power Mode – Port 1 may be configured to supply as much as 25 watts of

power when set to High mode. In normal mode it can supply a maximum of 15.4

watts. (Default: Normal)

• Power Reserve – Displays the percentage of the power budget (70W) being

drawn by attached devices.

• Port – The port number.

• PoE Enabled – The administrative status of PoE power on the port. Power is

automatically supplied when a device is detected on the port, providing that the

power demanded does not exceed the power budget for the switch or port.

• Delivering Power – The PoE power being delivered by the port.

• Current – The electrical current being delivered by the port.

• Priority – The port’s configured power priority setting. (Range: Low, Medium,

High, Critical; Default: Low)

• Allocation – The configured power budget for the port. (Range: 0-15.4 watts when

operating at Normal power mode, 0-25 watts for Port 1 when set to operate at High

power mode; Default: 15.4 watts)

Web – Click PoE, Settings.

Figure 3-34 POE Configuration

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 72 73 74

Žádné komentáře

Edge-Core ES4308-PoE Instalační příručka Strana 66