Edge-Core ES4625 Instalační příručka stáhnout pdf (Strana 47)

4-1

Chapter 4: Making Network Connections

Connecting Network Devices

This switch is designed to interconnect multiple segments (or collision domains). It

can be connected to network cards in PCs and servers, as well as to hubs, switches

or routers. It may also be connected to devices using optional Xenpak, XFP, or SFP

transceivers.

Twisted-Pair Devices

Each device requires an unshielded twisted-pair (UTP) cable with RJ-45 connectors

at both ends. Use Category 5, 5e or 6 cable for 1000BASE-T connections, Category

5 or better for 100BASE-TX connections, and Category 3 or better for 10BASE-T

connections.

Cabling Guidelines

The RJ-45 ports on the switch support automatic MDI/MDI-X pinout configuration, so

you can use standard straight-through twisted-pair cables to connect to any other

network device (PCs, servers, switches, routers, or hubs).

See Appendix B for further information on cabling.

Caution: Do not plug a phone jack connector into an RJ-45 port. This will damage the

switch. Use only twisted-pair cables with RJ-45 connectors that conform to

FCC standards.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 75 76

Žádné komentáře

Edge-Core ES4625 Instalační příručka Strana 47