Edge-Core WA2121 Uživatelská příručka Strana 9

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 74
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 8
Hardware Description
1-3
1
LED Indicators
The
Mini AP Router
includes four status LED indicators, as described in the following
figure and table.
Ethernet RJ-45 Ports
The
Mini AP Router
has the following RJ-45 ports:
The RJ-45 LAN port is for connection to a PC or to a 10/100 Mbps.
The RJ-45 WAN port is for connection to a DSL or cable modem, or to a LAN or
other device that provides your Internet access.
Both ports auto-negotiate the operating speed to 10/100 Mbps, the mode to half/full
duplex, and the pin signals to MDI/MDI-X. Automatic MDI/MDI-X support enables
you to use straight-through cables for all network connections to PCs, switches, or
hubs.
LED Status Description
POWER On Green Indicates that the system is working normally.
WAN On/Flashing Green Indicates a valid link on the WAN Ethernet port. Flashing indicates
network activity.
Off The Ethernet port has no valid link.
LAN On/Flashing Green Indicates a valid link on the LAN Ethernet port. Flashing indicates
network activity.
Off The Ethernet port has no valid link.
WLAN On/Flashing Green Indicates the 802.11b/g radio is enabled. Flashing indicates
wireless network activity.
Off Indicates the 802.11b/g radio is disabled.
Power
LAN Link/Activity
802.11b/g Link/
Activity
WAN Link/Activity
Zobrazit stránku 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 73 74

Komentáře k této Příručce

Žádné komentáře